Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 2 X 4 's into strips
By:David Wyse
Date: 1/4/2017, 12:01 pm
In Response To: Re: Strip: 2 X 4 's into strips (Steve Solomon)

I do my scarfing on the boat using TiteBond 2. I made a little miter box from some scrap strips for use with my pull saw. Basically I trim one end of the strip with the miter box and then fitup that strip. Tape or clamp in place temporarily. then I cut the miter on the other strip and fit that side. Before I remove the strips for glue I put some registration marks so I know where they go during glue up. Take the strips off, run a bead of glue and glue it back together using your favorite clamping method. Never had any issues and everything stayed tight including the scarf.

Regarding CA, I use it only as a clamp for stubborn strips. It dries very hard so you need to scrape it off the surface prior to sanding. I use a Medium CA so it doesn't seem to penetrate much into the wood so it sands without leaving any marks.

Messages In This Thread

Strip: 2 X 4 's into strips
Richard Mertins -- 1/3/2017, 6:41 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/3/2017, 8:36 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/3/2017, 11:54 pm
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/4/2017, 7:52 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 9:53 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 11:07 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 11:59 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 12:56 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/5/2017, 12:23 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/5/2017, 7:05 am
Overthinking
Curtis Fisher -- 1/5/2017, 8:16 pm
Re: Overthinking
Steve Solomon -- 1/6/2017, 12:12 am
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/6/2017, 3:12 am
Re: Strip: 2 X 4 's into strips
David Wyse -- 1/4/2017, 12:01 pm
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 9:22 am
Re: Strip: 2 X 4 's into strips
Nick R. -- 1/4/2017, 4:18 pm
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/5/2017, 9:06 am
Re: Strip: 2 X 4 's into strips
JohnAbercrombie -- 1/7/2017, 11:16 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/7/2017, 11:34 am
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/7/2017, 11:50 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/8/2017, 7:32 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/8/2017, 8:55 am
Re: Strip: 2 X 4 's into strips
dave koslow -- 1/9/2017, 2:11 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/9/2017, 5:18 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/9/2017, 1:20 am