Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Using a roller for automotive clear *PIC*
By:Paul T
Date: 1/4/2017, 8:12 pm
In Response To: Re: Material: Using a roller for automotive clear (Paul T)

Did my first test using a roller to apply catalyzed automotive clear today. The test base is a car door that was destroyed in a collision because I wanted something with some different contours.
The product went easily and I applied three heavy coat each right on top of the other and tipped each one off.
Tomorrow i'll wet sand and polish, and also take some mil readings to see what I have.

Messages In This Thread

Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 5:20 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 12/31/2016, 7:07 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 12/31/2016, 8:51 pm
Re: Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 9:06 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 1/1/2017, 9:53 am
Re: Material: Using a roller for automotive clear
JohnAbercrombie -- 1/1/2017, 10:19 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/1/2017, 12:42 pm
Re: Material: Using a roller for automotive clear
Nick R. -- 1/1/2017, 2:41 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/1/2017, 2:43 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:36 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:43 pm
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/4/2017, 8:12 pm
Re: Material: Using a roller for automotive clear
Bill Hamm -- 1/6/2017, 3:14 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 6:46 am
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/6/2017, 7:25 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/6/2017, 10:02 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 11:04 am
Re: Material: Using a roller for automotive clear
Roy Martin -- 1/6/2017, 11:35 am
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:54 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:41 pm