Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Recommendations?
By:Steve Solomon
Date: 1/19/2017, 12:23 pm
In Response To: Re: Tools: Recommendations? (Rob Macks/Laughing Loon CC&K)

1/4" thick strips forced into place created this result. So, he told people to use a block plane to level the strips near the stems which looked like a little staircase.

Rob, we're talking about two different things. Mis-alignments create "stair-stepping," no question. But if you take 8 boards, cut a 22.5 degree angle on each edge, and then glue them together even aligning everything perfectly you won't have a "fair curve" you'll have an octagon.

So I agree that if you didn't align the strips properly in the first place then it's going to be much more difficult to round over the octagon, but even if you did get everything perfectly aligned just easing the corners in and of itself isn't going to make the octagon into a circle. However, while stair-stepping is clearly a "mistake," seems to me that an eased octagon versus a perfect circle is a design decision - that's why I'm asking.

Messages In This Thread

Tools: Recommendations?
Patrick North -- 1/16/2017, 7:23 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:48 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:49 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/16/2017, 7:50 pm
Re: Tools: Recommendations?
scottbaxter -- 1/16/2017, 9:23 pm
Re: Tools: Recommendations?
Dan Caouette (CSCWC) -- 1/17/2017, 7:30 am
Surform
jaybabina -- 1/17/2017, 8:12 am
Re: Surform
Jim777 -- 1/21/2017, 6:28 am
Re: Tools: Recommendations? *PIC*
Etienne Muller -- 1/17/2017, 8:45 am
Re: Tools: Recommendations?
Nick R. -- 1/17/2017, 9:38 am
Re: Tools: Recommendations?
Rich D -- 1/17/2017, 9:42 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/17/2017, 10:55 am
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 9:42 am
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 12:32 pm
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 12:56 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 1:38 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/18/2017, 3:47 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/18/2017, 1:44 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 10:26 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 11:54 am
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 12:23 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 1:06 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 2:08 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 3:22 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 4:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 5:22 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/19/2017, 5:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:01 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 6:09 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:42 pm
Re: Tools: Recommendations?
Justin -- 1/20/2017, 5:25 am
Re: Tools: Recommendations?
Steve Solomon -- 1/20/2017, 6:45 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/20/2017, 8:57 am
Re: Tools: Recommendations?
Etienne Muller -- 1/20/2017, 3:10 pm
Re: Tools: Recommendations?
Bob Ten Eyck -- 1/22/2017, 12:13 pm
Fair ?
jaybabina -- 1/19/2017, 11:56 am
Re: Fair ?
Patrick North -- 1/19/2017, 12:20 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 12:39 pm
Re: Fair ?
scottbaxter -- 1/19/2017, 4:28 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 5:43 pm
Re: Fair ?
Bill Hamm -- 1/20/2017, 12:08 am
Re: Fair ?
Steve Solomon -- 1/20/2017, 6:37 am
Re: Fair ?
Dan Caouette (CSCWC) -- 1/19/2017, 5:10 pm
Re: Fair ?
Marc Upchurch -- 1/19/2017, 5:45 pm
Re: Fair ?
Mike Bielski -- 1/19/2017, 10:45 pm
Re: Tools: ROS and neighbours
Ian Johnson -- 1/22/2017, 9:32 pm
Re: Tools: ROS and neighbours
anewhouse -- 1/22/2017, 10:19 pm
Fair
Les Cheeseman -- 1/29/2017, 10:40 am