Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Recommendations?
By:Rob Macks/Laughing Loon CC&K
Date: 1/19/2017, 1:06 pm
In Response To: Re: Tools: Recommendations? (Steve Solomon)

Rob, we're talking about two different things. Mis-alignments create "stair-stepping," no question. But if you take 8 boards, cut a 22.5 degree angle on each edge, and then glue them together even aligning everything perfectly you won't have a "fair curve" you'll have an octagon.

No you'll have a mast

If you have a rounded hard chine on a stripper hull, like I do on my Disko Bay, then you need to use 5/8" or even 1/2" wide strips so you don't have acute angles on strip joints.

3/4" wide strips work well for most designs with such small facets joint angles are miniscule.

No octagons!

Messages In This Thread

Tools: Recommendations?
Patrick North -- 1/16/2017, 7:23 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:48 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:49 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/16/2017, 7:50 pm
Re: Tools: Recommendations?
scottbaxter -- 1/16/2017, 9:23 pm
Re: Tools: Recommendations?
Dan Caouette (CSCWC) -- 1/17/2017, 7:30 am
Surform
jaybabina -- 1/17/2017, 8:12 am
Re: Surform
Jim777 -- 1/21/2017, 6:28 am
Re: Tools: Recommendations? *PIC*
Etienne Muller -- 1/17/2017, 8:45 am
Re: Tools: Recommendations?
Nick R. -- 1/17/2017, 9:38 am
Re: Tools: Recommendations?
Rich D -- 1/17/2017, 9:42 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/17/2017, 10:55 am
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 9:42 am
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 12:32 pm
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 12:56 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 1:38 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/18/2017, 3:47 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/18/2017, 1:44 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 10:26 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 11:54 am
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 12:23 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 1:06 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 2:08 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 3:22 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 4:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 5:22 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/19/2017, 5:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:01 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 6:09 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:42 pm
Re: Tools: Recommendations?
Justin -- 1/20/2017, 5:25 am
Re: Tools: Recommendations?
Steve Solomon -- 1/20/2017, 6:45 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/20/2017, 8:57 am
Re: Tools: Recommendations?
Etienne Muller -- 1/20/2017, 3:10 pm
Re: Tools: Recommendations?
Bob Ten Eyck -- 1/22/2017, 12:13 pm
Fair ?
jaybabina -- 1/19/2017, 11:56 am
Re: Fair ?
Patrick North -- 1/19/2017, 12:20 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 12:39 pm
Re: Fair ?
scottbaxter -- 1/19/2017, 4:28 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 5:43 pm
Re: Fair ?
Bill Hamm -- 1/20/2017, 12:08 am
Re: Fair ?
Steve Solomon -- 1/20/2017, 6:37 am
Re: Fair ?
Dan Caouette (CSCWC) -- 1/19/2017, 5:10 pm
Re: Fair ?
Marc Upchurch -- 1/19/2017, 5:45 pm
Re: Fair ?
Mike Bielski -- 1/19/2017, 10:45 pm
Re: Tools: ROS and neighbours
Ian Johnson -- 1/22/2017, 9:32 pm
Re: Tools: ROS and neighbours
anewhouse -- 1/22/2017, 10:19 pm
Fair
Les Cheeseman -- 1/29/2017, 10:40 am