Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Recommendations?
By:Rob Macks/Laughing Loon CC&K
Date: 1/19/2017, 3:22 pm
In Response To: Re: Tools: Recommendations? (Steve Solomon)

In all cases you'll not have a corner (connotes a sharp angle) but a 1/64" or less at the joints requiring rounding to the center of the strips. With strip edges properly aligned, the angle change at the joint of the strip facets is almost imperceptible.

It's only under the abstract microscopic minds eye of words that the angle looms large.

In practice sanding with a ROS using 60 grit paper transitions the surface into a smooth fair surface quickly

I purposely leave strips with a sawn surface on the 3/4" width acting as a visual indicator telling when sanding is complete as all saw marks disappear and a uniform surface is left by the 60 grit sanding disk.

https://youtu.be/ah3fpZnV448

Messages In This Thread

Tools: Recommendations?
Patrick North -- 1/16/2017, 7:23 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:48 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:49 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/16/2017, 7:50 pm
Re: Tools: Recommendations?
scottbaxter -- 1/16/2017, 9:23 pm
Re: Tools: Recommendations?
Dan Caouette (CSCWC) -- 1/17/2017, 7:30 am
Surform
jaybabina -- 1/17/2017, 8:12 am
Re: Surform
Jim777 -- 1/21/2017, 6:28 am
Re: Tools: Recommendations? *PIC*
Etienne Muller -- 1/17/2017, 8:45 am
Re: Tools: Recommendations?
Nick R. -- 1/17/2017, 9:38 am
Re: Tools: Recommendations?
Rich D -- 1/17/2017, 9:42 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/17/2017, 10:55 am
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 9:42 am
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 12:32 pm
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 12:56 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 1:38 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/18/2017, 3:47 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/18/2017, 1:44 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 10:26 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 11:54 am
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 12:23 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 1:06 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 2:08 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 3:22 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 4:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 5:22 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/19/2017, 5:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:01 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 6:09 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:42 pm
Re: Tools: Recommendations?
Justin -- 1/20/2017, 5:25 am
Re: Tools: Recommendations?
Steve Solomon -- 1/20/2017, 6:45 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/20/2017, 8:57 am
Re: Tools: Recommendations?
Etienne Muller -- 1/20/2017, 3:10 pm
Re: Tools: Recommendations?
Bob Ten Eyck -- 1/22/2017, 12:13 pm
Fair ?
jaybabina -- 1/19/2017, 11:56 am
Re: Fair ?
Patrick North -- 1/19/2017, 12:20 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 12:39 pm
Re: Fair ?
scottbaxter -- 1/19/2017, 4:28 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 5:43 pm
Re: Fair ?
Bill Hamm -- 1/20/2017, 12:08 am
Re: Fair ?
Steve Solomon -- 1/20/2017, 6:37 am
Re: Fair ?
Dan Caouette (CSCWC) -- 1/19/2017, 5:10 pm
Re: Fair ?
Marc Upchurch -- 1/19/2017, 5:45 pm
Re: Fair ?
Mike Bielski -- 1/19/2017, 10:45 pm
Re: Tools: ROS and neighbours
Ian Johnson -- 1/22/2017, 9:32 pm
Re: Tools: ROS and neighbours
anewhouse -- 1/22/2017, 10:19 pm
Fair
Les Cheeseman -- 1/29/2017, 10:40 am