Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Scratch Repair
By:JohnAbercrombie
Date: 3/23/2017, 4:35 pm
In Response To: Re: Material: Scratch Repair (Mike Bielski)

When it dries, wet sand

And, the more 'drying time' you can give it, the better your results IMO.
Especially if you have laid in quite a few coats to fill the scratch, leaving for a month (depending on the temperature in your kayak storage area) would not be too long before trying to level and rub out to a glossy finish.

Soft spar-type varnishes don't polish out as well as harder finishes, so you need to give it the best chance possible to harden.
IME, of course.

Messages In This Thread

Material: Scratch Repair
Richard Mertins -- 3/23/2017, 7:36 am
Re: Material: Scratch Repair
JayBabina -- 3/23/2017, 7:51 am
Re: Material: Scratch Repair
Richard Mertins -- 3/23/2017, 7:57 am
Re: Material: Scratch Repair
scottbaxter -- 3/23/2017, 8:09 am
Re: Material: Scratch Repair
Mike Bielski -- 3/23/2017, 11:44 am
Re: Material: Scratch Repair
JohnAbercrombie -- 3/23/2017, 4:35 pm
Re: Material: Scratch Repair
Mike Bielski -- 3/23/2017, 4:48 pm
Re: Material: Scratch Repair
Nick Schade - Guillemot Kayaks -- 3/24/2017, 2:39 pm
Re: Material: Scratch Repair
Dan Thaler -- 3/24/2017, 5:21 pm
Re: Material: Scratch Repair
scottbaxter -- 3/24/2017, 10:19 pm