Strip: Fiberglassing problem *PIC*
I need advise for fixing a problem. I cut out the cockpit in my Guillemot this afternoon and it looks like the fiberglass has pulled away from the wood in one area a few small areas along the cut I used 4 oz e glass and MAS epoxy with slow hardener. I followed Rob Macks' recommendations for transparent glass the best I could for a beginner. I made the cutout with a jig saw. I think when I cut through the form the saw bounced and broke the glue joint between the two strips and the fiberglass pulled away. Any suggestions for a fix and since it happened here should I be worried about the rest of the fiberglass?
Thanks
Aaron
Messages In This Thread
- Strip: Fiberglassing problem *PIC*
Aaronpotter -- 4/29/2017, 8:14 pm- Re: Strip: Fiberglassing problem
Bob Ten Eyck -- 4/30/2017, 12:12 am- Re: Strip: Fiberglassing problem
Etienne Muller -- 4/30/2017, 3:36 am- Re: Strip: Fiberglassing problem
Etienne Muller -- 4/30/2017, 3:41 am
- Re: Strip: Fiberglassing problem
Nick Schade - Guillemot Kayaks -- 4/30/2017, 7:37 am- Question: Fiberglassing problem
JayBabina -- 4/30/2017, 8:36 am- Re: Question: Fiberglassing problem
Aaronpotter -- 4/30/2017, 9:05 am- Re: Question: Fiberglassing problem
JayBabina -- 4/30/2017, 12:11 pm
- Re: Question: Fiberglassing problem
- Re: Strip: Fiberglassing problem
Rob Macks/Laughing Loon CC&K -- 4/30/2017, 12:26 pm- Re: Strip: Fiberglassing problem
Etienne Muller -- 4/30/2017, 5:18 pm- Re: Strip: Fiberglassing problem
Rob Macks/Laughing Loon CC&K -- 4/30/2017, 6:58 pm- Re: Strip: Fiberglassing problem
Nick Schade - Guillemot Kayaks -- 5/1/2017, 10:10 am- Re: Strip: Fiberglassing problem *PIC*
Rob Macks/Laughing Loon CC&K -- 5/1/2017, 12:46 pm
- Re: Strip: Fiberglassing problem *PIC*
- Re: Strip: Fiberglassing problem *PIC*
Dave Gentry -- 5/1/2017, 11:30 am - Re: Strip: Fiberglassing problem
- Re: Strip: Fiberglassing problem
Aaronpotter -- 4/30/2017, 8:22 pm- Re: Strip: Fiberglassing problem
Etienne Muller -- 5/1/2017, 3:14 am- Re: Strip: Fiberglassing problem
Aaronpotter -- 5/1/2017, 12:17 pm- Recovery from Major Mistakes
Nick Schade - Guillemot Kayaks -- 5/1/2017, 2:18 pm- Re: Recovery from Major Mistakes *PIC*
Rob Macks/Laughing Loon CC&K -- 5/1/2017, 2:51 pm- Re: Recovery from Major Mistakes
Etienne Muller -- 5/1/2017, 2:52 pm - Re: Recovery from Major Mistakes
- Re: Recovery from Major Mistakes *PIC*
- Recovery from Major Mistakes
- Re: Strip: Fiberglassing problem
- Re: Strip: Fiberglassing problem
- Re: Strip: Fiberglassing problem
- Re: Strip: Fiberglassing problem