Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Gaps inside hull
By:John Messinger
Date: 5/7/2017, 7:12 am
In Response To: Strip: Gaps inside hull (Aaronpotter)

Here's my 2 cents: I use West 407 fairing filler (phenolic microballoons) in epoxy. PROS: The brown color matches the darker shades of western red cedar, it sands easily, it is very light so you are adding very little weight to the boat, it mixes thoroughly, no contaminants, no problems with bonding epoxy to it, it absorbs light so there are very few light beams visible through my hulls. CONS: high cost, slower cure time than most BORG available wood fillers.

I bought some phenolic microballoons from USComposites a few years ago. They worked fine, but the color was very red, almost fire engine red.

Messages In This Thread

Strip: Gaps inside hull
Aaronpotter -- 5/5/2017, 11:14 pm
Re: Strip: Gaps inside hull
Tmh -- 5/6/2017, 1:38 am
Re: Strip: Gaps inside hull
JohnAbercrombie -- 5/6/2017, 10:50 am
Re: Strip: Gaps inside hull
John R -- 5/6/2017, 11:33 am
Re: Strip: Gaps inside hull
JohnAbercrombie -- 5/6/2017, 12:21 pm
Re: Strip: Gaps inside hull
Olli -- 5/6/2017, 12:48 pm
Re: Strip: Gaps inside hull
JohnAbercrombie -- 5/6/2017, 1:43 am
Re: Strip: Gaps inside hull
scottbaxter -- 5/6/2017, 5:01 am
Re: Strip: Gaps inside hull *PIC*
Rob Macks/Laughing Loon CC&K -- 5/6/2017, 8:23 am
Re: Strip: Gaps inside hull
Rob Macks/Laughing Loon CC&K -- 5/6/2017, 1:42 pm
Re: Strip: Gaps inside hull
JohnAbercrombie -- 5/6/2017, 2:09 pm
Re: Strip: Gaps inside hull
JohnAbercrombie -- 5/6/2017, 2:13 pm
Re: Strip: Gaps inside hull
Rob Macks/Laughing Loon CC&K -- 5/6/2017, 4:10 pm
Re: Strip: Gaps inside hull
Aaronpotter -- 5/6/2017, 5:47 pm
Re: Strip: Gaps inside hull
Rob Macks/Laughing Loon CC&K -- 5/6/2017, 4:17 pm
Re: Strip: Gaps inside hull
Nick R. -- 5/6/2017, 10:53 am
Re: Strip: Gaps inside hull
Tmh -- 5/6/2017, 1:06 pm
Filling Gaps with Epoxy
Nick Schade - Guillemot Kayaks -- 5/6/2017, 7:10 pm
Re: Strip: Gaps inside hull
John Messinger -- 5/7/2017, 7:12 am
Re: Strip: Gaps inside hull
Bill Hamm -- 5/9/2017, 12:51 am