Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Do you glass your wood coamings?
By:Etienne Muller
Date: 6/11/2017, 5:21 am
In Response To: Re: S&G: Do you glass your wood coamings? *PIC* (Dan Caouette (CSCWC))

If I was building them that light I would glass them too. I'd glass them to the hull while I was at it. That is quite a small contact width with the hull.

I worked on a s+g petrel kit from Fyne Boats, and the CNC coaming riser was even less then half an inch. More like a quarter. It is a measure of just how accurate the CNC machines are. We filleted and glassed it to beef it up. It ended up feeling strong enough, but I would still not lift the boat by the lip, which I do happily with my coamings.

It was also quite fiddly to put together, as each ring was made up of short sections with the joins on the different rings staggered. Superglue was the solution to getting the rings joined together. No room for error though. Coaming rings are very wasteful of plywood, so I can see why the CNC guys do it that way. I make them in halves, and go through a fair amount of a sheet of ply.

Et

Messages In This Thread

S&G: Do you glass your wood coamings?
JohnAbercrombie -- 6/9/2017, 3:04 pm
Re: S&G: Do you glass your wood coamings?
Les Cheeseman -- 6/9/2017, 5:01 pm
Re: S&G: Do you glass your wood coamings?
scottbaxter -- 6/9/2017, 5:05 pm
Re: S&G: Do you glass your wood coamings?
Etienne Muller -- 6/9/2017, 7:32 pm
Re: S&G: Do you glass your wood coamings?
Nick Schade - Guillemot Kayaks -- 6/9/2017, 9:00 pm
Re: S&G: Do you glass your wood coamings?
Bill Hamm -- 6/10/2017, 12:39 am
Re: S&G: Do you glass your wood coamings? *PIC*
Dan Caouette (CSCWC) -- 6/10/2017, 8:46 am
Re: S&G: Do you glass your wood coamings?
Etienne Muller -- 6/11/2017, 5:21 am
Re: S&G: Do you glass your wood coamings?
bsoderholm -- 6/27/2017, 12:06 am
Carbon Fiber on Plywood Coamings
Dan Caouette (CSCWC) -- 6/27/2017, 9:17 am
Re: Carbon Fiber on Plywood Coamings
bsoderholm -- 6/27/2017, 9:45 am
Re: Carbon Fiber on Plywood Coamings
JohnAbercrombie -- 6/27/2017, 11:12 am
Re: Carbon Fiber on Plywood Coamings *PIC*
JohnAbercrombie -- 6/27/2017, 11:47 am
Re: Carbon Fiber on Plywood Coamings
JayBabina -- 6/27/2017, 1:06 pm
Re: Carbon Fiber on Plywood Coamings
scottbaxter -- 6/27/2017, 1:55 pm
Re: Carbon Fiber on Plywood Coamings
Dan Caouette (CSCWC) -- 6/27/2017, 3:05 pm
Re: Carbon Fiber on Plywood Coamings
Nick Schade - Guillemot Kayaks -- 6/27/2017, 1:47 pm
Re: Carbon Fiber on Plywood Coamings
Bill Hamm -- 6/29/2017, 1:49 am
Re: Carbon Fiber on Plywood Coamings
Bill Hamm -- 6/29/2017, 2:13 am
Re: Carbon Fiber on Plywood Coamings
JohnAbercrombie -- 6/29/2017, 9:53 am
Re: Carbon Fiber on Plywood Coamings
scottbaxter -- 6/29/2017, 11:31 am
Re: S&G: Do you glass your wood coamings?
JayBabina -- 6/10/2017, 9:00 am
Re: S&G: Do you glass your wood coamings?
JohnAbercrombie -- 6/10/2017, 11:41 am
Re: S&G: Do you glass your wood coamings?
Bill Hamm -- 6/10/2017, 8:33 pm
Re: S&G: Do you glass your wood coamings?
JohnAbercrombie -- 6/10/2017, 10:59 pm
Re: S&G: Do you glass your wood coamings?
Etienne Muller -- 6/11/2017, 5:42 am
Re: S&G: Do you glass your wood coamings?
JohnAbercrombie -- 6/11/2017, 12:17 pm
Re: S&G: Do you glass your wood coamings?
Bill Hamm -- 6/11/2017, 8:52 pm
Re: S&G: Do you glass your wood coamings?
bsoderholm -- 6/12/2017, 4:59 pm
Re: S&G: Do you glass your wood coamings?
Bill Hamm -- 6/15/2017, 1:27 am
Re: S&G: Do you glass your wood coamings?
JohnAbercrombie -- 6/15/2017, 10:36 am
Re: S&G: Do you glass your wood coamings?
bsoderholm -- 6/16/2017, 9:05 am
Re: S&G: Do you glass your coaming-now toggles
JohnAbercrombie -- 6/16/2017, 11:21 am