Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: application problem
By:Etienne Muller
Date: 6/14/2017, 4:21 pm
In Response To: Epoxy: application problem *PIC* (Aaronpotter)

With Mas it is really important to overcoat before it is touch dry. Its low viscosity allows surface tension to pull it away from a surface that has gone tack free.

I keep a sharp eye on it, checking every hour or so. I find three and a half to four hours is usually about right. It is also important to ensure that every coat covers the previous one completely, with no dry spots, or the following coat will want pull away from those areas.

The very thing that makes Mas so good for wetout, (low viscosity) makes it unforgiving for fillcoats that are applied too late.

Get to the fillcoats in time, and it works like a charm.

Et.

Messages In This Thread

Epoxy: application problem *PIC*
Aaronpotter -- 6/14/2017, 12:27 pm
Re: Epoxy: application problem
Nick Schade - Guillemot Kayaks -- 6/14/2017, 1:22 pm
Re: Epoxy: application problem
JohnAbercrombie -- 6/14/2017, 1:43 pm
Re: Epoxy: application problem
Rob Macks/Laughing Loon CC&K -- 6/14/2017, 2:05 pm
Re: Epoxy: application problem
Aaron Potter -- 6/14/2017, 4:47 pm
Re: Epoxy: application problem
Etienne Muller -- 6/14/2017, 4:21 pm
Re: Epoxy: application problem
Aaron Potter -- 6/14/2017, 4:56 pm
Re: Epoxy: application problem
Nick Schade - Guillemot Kayaks -- 6/14/2017, 7:11 pm
Re: Epoxy: application problem
JayBabina -- 6/14/2017, 7:32 pm
Re: Epoxy: application problem
mick allen -- 6/14/2017, 11:26 pm
Re: Epoxy: application problem
Bill Hamm -- 6/15/2017, 1:20 am
Re: Epoxy: application problem
Aaronpotter -- 6/15/2017, 12:16 pm
Mixing Cups: Cheap Clear Plastic
Dan Caouette (CSCWC) -- 6/15/2017, 1:42 pm
Re: Mixing Cups: Cheap Clear Plastic
mick allen -- 6/15/2017, 2:37 pm
Re: Mixing Cups: Cheap Clear Plastic
Dan Caouette (CSCWC) -- 6/15/2017, 5:04 pm
Re: Mixing Cups: Cheap Clear Plastic
Aaron Potter -- 6/17/2017, 2:01 pm
Re: Mixing Cups: Cheap Clear Plastic
mick allen -- 6/19/2017, 5:51 pm
Re: Mixing Cups: Cheap Clear Plastic
Nick Schade - Guillemot Kayaks -- 6/15/2017, 7:17 pm
Re: Mixing Cups: Cheap Clear Plastic
JohnAbercrombie -- 6/15/2017, 8:09 pm
Re: Epoxy: application problem
Rob Macks/Laughing Loon CC&K -- 6/20/2017, 9:38 am
Re: Epoxy: application problem
JohnAbercrombie -- 6/20/2017, 11:49 am
Re: Epoxy: application problem
Bill Hamm -- 6/21/2017, 1:27 am