Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Through-deck skeg experiences?
By:Paul D
Date: 6/18/2017, 9:06 pm
In Response To: Re: Other: Through-deck skeg experiences? (JohnAbercrombie)

no worries John,I wanted hands free!Did work with under deck but Skeg control turned out to be so infrequent I went for plan B.for more finess in setting.
Plan c is the shock cord down haul single rope up haul.Go for that and do an evolutionary throwback to simple.
I put a couple of brass tubes just under deck hight at the front and back of the box.Then it was about directing the control lines through glass reinforced ferrules the same brass tubes through both bulkheads.I learnt to pull on the control ball before pushing the other control ball.This unlocked the return side enough to release the system for sliding through.
Cavity width 7mm,Perspex Skeg width 4.5 mm (old caravan window).very sloppy but no rattles,that I can hear and locks her into the water just fine.My aluminium one from the same caravan bent too easily,might have been too thin.

Messages In This Thread

Other: Through-deck skeg experiences? *PIC*
JohnAbercrombie -- 6/18/2017, 1:07 pm
Re: Other: Through-deck skeg experiences?
Paul D -- 6/18/2017, 2:53 pm
Re: Other: Through-deck skeg experiences?
JohnAbercrombie -- 6/18/2017, 5:59 pm
Re: Other: Through-deck skeg experiences?
Paul D -- 6/18/2017, 9:06 pm
Re: Other: Through-deck skeg experiences?
Nick Schade - Guillemot Kayaks -- 6/18/2017, 8:29 pm
Re: Other: Through-deck skeg experiences?
JohnAbercrombie -- 6/18/2017, 9:37 pm
Re: Other: Through-deck skeg experiences? *PIC*
Nick Schade - Guillemot Kayaks -- 6/19/2017, 7:51 am
Re: Other: Through-deck skeg experiences?
Paul Sylvester -- 6/19/2017, 4:47 am
Why Through-deck skeg
JayBabina -- 6/20/2017, 8:12 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/20/2017, 11:35 am
Re: Why Through-deck skeg
Etienne Muller -- 6/20/2017, 12:26 pm
Re: Why Through-deck skeg
JohnAbercrombie -- 6/20/2017, 6:22 pm
Re: Why Through-deck skeg
Etienne Muller -- 6/20/2017, 12:19 pm
Re: Why Through-deck skeg
JohnAbercrombie -- 6/20/2017, 6:13 pm
Re: Why Through-deck skeg
Etienne Muller -- 6/21/2017, 11:44 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/21/2017, 12:21 pm
Re: Why Through-deck skeg
Bill Hamm -- 6/22/2017, 3:10 am
Re: Why Through-deck skeg
Etienne Muller -- 6/22/2017, 11:17 am
Re: Why Through-deck skeg
Bill Hamm -- 6/23/2017, 12:34 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/23/2017, 10:24 am
Re: Why Through-deck skeg
Etienne Muller -- 6/23/2017, 11:24 am
Re: Why Through-deck skeg
Dan Caouette (CSCWC) -- 6/23/2017, 11:52 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/23/2017, 11:59 am
Re: Why Through-deck skeg
Dan Caouette (CSCWC) -- 6/23/2017, 12:49 pm
Re: Why Through-deck skeg
Bill Hamm -- 6/24/2017, 1:02 am
Re: Why Through-deck skeg
Etienne Muller -- 6/23/2017, 1:20 pm
Re: Why Through-deck skeg
Steve Solomon -- 6/23/2017, 2:56 pm
Re: Why Through-deck skeg
Bill Hamm -- 6/24/2017, 1:05 am
Re: Why Through-deck skeg
Bill Hamm -- 6/24/2017, 12:59 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/24/2017, 10:19 am
Re: Why Through-deck skeg
Etienne Muller -- 6/24/2017, 3:28 am
Skudder *PIC*
Dan Caouette (CSCWC) -- 6/24/2017, 9:35 am
Re: Skudder
Etienne Muller -- 6/24/2017, 9:40 am
Re: Skudder
Bill Hamm -- 6/24/2017, 8:35 pm
Re: Skudder
Bill Hamm -- 6/26/2017, 1:36 am
Re: Why Through-deck skeg
Etienne Muller -- 6/22/2017, 11:22 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/22/2017, 8:17 pm
Re: Why Through-deck skeg
Etienne Muller -- 6/23/2017, 5:23 am
Re: Why Through-deck skeg
JohnAbercrombie -- 6/23/2017, 10:32 am
Re: Why Through-deck skeg
Nick Schade - Guillemot Kayaks -- 6/20/2017, 1:33 pm
Re: Why Through-deck skeg
Paul D -- 7/5/2017, 4:57 am
Re: Why Through-deck skeg
JayBabina -- 7/5/2017, 8:17 am
Too Much Skeg
Nick Schade - Guillemot Kayaks -- 7/5/2017, 9:52 am
Re: Too Much Skeg *PIC*
JohnAbercrombie -- 7/5/2017, 11:30 am
Re: Too Much Skeg
JohnAbercrombie -- 7/5/2017, 11:34 am
Re: Why Through-deck skeg
Paul D -- 7/5/2017, 2:58 pm