Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Maroske fittings
By:Aaronpotter
Date: 6/19/2017, 12:56 pm
In Response To: Re: Material: Maroske fittings (JayBabina)

I see that now. I had the test piece turned upside down and was just thinking about how the fiberglass over the putty would seal everything up. I wasn't thinking about the two holes on the topside that would be exposed.

At least it was just a test piece and not a whole deck full.

Messages In This Thread

Material: Maroske fittings
Aaron Potter -- 6/18/2017, 10:37 pm
Re: Material: Maroske fittings
JayBabina -- 6/19/2017, 6:07 am
Re: Material: Maroske fittings
Aaronpotter -- 6/19/2017, 12:56 pm
Re: Material: Maroske fittings
Etienne Muller -- 6/19/2017, 2:28 pm
Re: Material: Maroske fittings
JohnAbercrombie -- 6/19/2017, 2:49 pm
Re: Material: Maroske fittings
Etienne Muller -- 6/19/2017, 3:39 pm
Re: Material: Maroske fittings *PIC*
Scott Innes -- 11/26/2017, 8:48 pm
Re: Material: Maroske fittings
Etienne Muller -- 11/27/2017, 4:04 am
De-Reske Fittings
mick allen -- 6/19/2017, 3:58 pm
Ping pong recesses
jayBabina -- 6/19/2017, 4:30 pm
DeReske vs Pongesque
mick allen -- 6/19/2017, 5:46 pm
Maroske fittings: 3D Printed *PIC*
Dan Caouette (CSCWC) -- 6/20/2017, 8:26 am
Re: Maroske fittings: 3D Printed
JohnAbercrombie -- 6/20/2017, 11:42 am
Re: Maroske fittings: 3D Printed
Etienne Muller -- 6/20/2017, 12:10 pm
Re: Maroske fittings: 3D Printed
Dan Caouette (CSCWC) -- 6/20/2017, 12:29 pm
Re: Maroske fittings: 3D Printed
JohnAbercrombie -- 6/20/2017, 6:23 pm
Re: Maroske fittings: 3D Printed *PIC*
Dan Caouette (CSCWC) -- 6/21/2017, 7:56 am
Re: Maroske fittings: 3D Printed
Etienne Muller -- 6/20/2017, 12:30 pm
Re: Maroske fittings: 3D Printed
Etienne Muller -- 6/20/2017, 12:31 pm
Re: Maroske fittings: 3D Printed
Dan Caouette (CSCWC) -- 6/20/2017, 12:15 pm