Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: First strip build - first question
By:Phil
Date: 10/7/2017, 12:08 pm
In Response To: Re: Tools: First strip build - first question (Paul Harker)

Good luck starting. I built my one and only Guillemot about 3 years ago. Here are some additions to everyone's input:

Nielsen hand plane: I had others but this tool was an absolute pleasure and didn't need sharpening throughout the project.
Small shaped scrapers with a bench grinder to keep them sharp
For a small shop/garage: a lift to put the project away after each weekend
Cheap Stanley saw horses: plastic ones worked great since they're light and easy to store
Shop lighting (an absolute must for finishing)
Shop heating (I had to bring my kayak into the house in the winter to continue epoxy work, not good for relationship building)
Shop power: you'll have a lot of tools running at the same time. I re-wired the garage with 220V outlets to get a boost out of the compressor and saws.
Extra wood for practicing: I found that I ran out of certain nice pieces and had to sacrifice the look a bit (accommodate a shorter spliced piece instead of having extra long strips)

Have fun, I thoroughly enjoyed the experience. I started with CAD using points from a lofting table. I resorted to buying plans since I couldn't make sense of the bow and stern transitions. Feel free to check out the blog attached.

Phil

https://sommerkayak.blogspot.com

Messages In This Thread

Tools: First strip build - first question
Paul Harker -- 10/6/2017, 5:46 pm
Re: Tools: First strip build - first question
Ken Blanton -- 10/6/2017, 7:08 pm
Re: Tools: First strip build - first question
GCole -- 10/6/2017, 7:25 pm
Re: Tools: First strip build - first question
anewhouse -- 10/6/2017, 9:06 pm
Re: Tools: First strip build - first question
M A Bielski -- 10/6/2017, 10:30 pm
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 7:21 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/6/2017, 11:26 pm
Re: Tools: First strip build - first question
Etienne Muller -- 10/7/2017, 4:42 am
Re: Tools: First strip build - first question
Etienne Muller -- 10/7/2017, 4:48 am
Re: Tools: First strip build - first question
Jay Babina -- 10/7/2017, 8:34 am
Re: Tools: First strip build - first question
Paul Harker -- 10/7/2017, 9:12 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 10:55 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 11:06 am
Re: Tools: First strip build - first question
M A Bielski -- 10/7/2017, 11:37 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/8/2017, 1:48 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/10/2017, 2:07 am
Re: Tools: First strip build - first question
M A Bielski -- 10/12/2017, 10:55 pm
Re: Tools: First strip build - first question
Phil -- 10/7/2017, 12:08 pm
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 7:47 pm
Re: Tools: First strip build - first question
Bill Hamm -- 10/10/2017, 2:32 am
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 8:23 pm
Re: Tools: First strip build - first question
Nick R. -- 10/7/2017, 11:47 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 1:31 pm
Re: Tools: First strip build - first question
Paul Sylvester -- 10/8/2017, 6:05 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/8/2017, 2:59 pm
Re: Tools: First strip build - first question
Jay Babina -- 10/8/2017, 6:54 pm
Tool are worthless, unless..... *PIC*
Laughing Loon CC&K -- 10/9/2017, 11:51 am
Well said. *NM*
Curtis Fisher -- 10/9/2017, 1:33 pm
Re: Tools: First strip build - first question
John Messinger -- 10/10/2017, 8:31 am
Re: Tools: First strip build - first question
Nick Schade - Guillemot Kayaks -- 10/10/2017, 9:11 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/10/2017, 11:48 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/11/2017, 12:20 am
Re: Tools: First strip build - first question
Nick Schade - Guillemot Kayaks -- 10/11/2017, 9:21 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/11/2017, 11:58 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/12/2017, 2:13 am
Re: Tools: First strip build - first question
Marc Upchurch -- 10/11/2017, 8:24 pm
Re: Tools: Belt sander CAUTION
John Messinger -- 10/11/2017, 9:08 pm
Re: Tools: Belt sander CAUTION
JayBabina -- 10/13/2017, 11:22 am
cautionary advice
Jay Babina -- 10/11/2017, 6:31 pm
Re: cautionary advice
JohnAbercrombie -- 10/11/2017, 8:14 pm
Re: cautionary advice
Björn Thomasson -- 10/27/2017, 4:31 am
Re: cautionary advice
M A Bielski -- 10/27/2017, 8:38 am
Re: cautionary advice
JohnAbercrombie -- 10/27/2017, 9:28 am
Re: Tools: First strip build - first question
Paul Harker -- 10/13/2017, 10:51 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/13/2017, 12:24 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/13/2017, 2:06 pm
Re: Tools: First strip build - first question
Bill Hamm -- 10/14/2017, 12:56 am
Re: Tools: ROS and Sanding
Laughing Loon CC&K -- 10/16/2017, 9:18 am
Re: Tools: ROS and Sanding
Paul Harker -- 10/16/2017, 10:11 am
Re: Tools: ROS and Sanding
Bill Hamm -- 10/19/2017, 2:01 am