Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: 5/4 Rough Western Red Cedar -- best
By:Paul Harker
Date: 10/27/2017, 4:26 pm
In Response To: Material: 5/4 Rough Western Red Cedar -- best approach? (Paul Harker)

After reading the comments, watching Rob Macks' video, re-watching Nick's 2nd video on building the Play, and investigating the grain in my newly acquired 5/4, I've decided to rip to 3/4, rotate, then cut strips. The fact is I'm going to lose material either way, and this seems a good way to make cutting the strips slightly more manageable.

Right now one end of the boards are sticking out the workshop door into the house, while the other end leaves just enough room in front of the exterior door to put my saw (2hp Shopsmith PowerPro) in position to feed the stock through the door.

Now I've got to manage infeed/outfeed tables and find a helper.

Messages In This Thread

Material: 5/4 Rough Western Red Cedar -- best approach?
Paul Harker -- 10/27/2017, 10:54 am
Re: Material: 5/4 Rough Western Red Cedar -- best
bob borovicka -- 10/27/2017, 1:12 pm
Re: Material: 5/4 Rough Western Red Cedar -- best *PIC*
Laughing Loon CC&K -- 10/27/2017, 1:40 pm
Re: Material: 5/4 Rough Western Red Cedar -- best *PIC*
Laughing Loon CC&K -- 10/27/2017, 1:44 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/28/2017, 10:34 am
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/27/2017, 2:24 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Laughing Loon CC&K -- 10/27/2017, 3:08 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/27/2017, 4:59 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Nick Schade - Guillemot Kayaks -- 10/28/2017, 10:18 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Rod Tait - Orca Boats -- 10/27/2017, 3:46 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Laughing Loon CC&K -- 10/27/2017, 4:53 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Paul Harker -- 10/28/2017, 10:05 am
Re: Thin Kerf Blades Tenyru vs Freud
Nick Schade - Guillemot Kayaks -- 10/28/2017, 10:33 am
Re: Thin Kerf Blades Tenyru vs Freud
Bill Hamm -- 10/29/2017, 1:04 am
Re: Thin Kerf Blades Tenyru vs Freud
Nick Schade - Guillemot Kayaks -- 10/29/2017, 9:53 am
Re: Thin Kerf Blades Tenyru vs Freud
Bill Hamm -- 10/30/2017, 1:59 am
Re: Thin Kerf Blades Tenyru vs Freud
JohnAbercrombie -- 10/30/2017, 10:54 am
Re: Thin Kerf Blades Tenyru vs Freud
Bill Hamm -- 10/31/2017, 8:17 am
Re: Thin Kerf Blades Tenyru vs Freud
Nick Schade - Guillemot Kayaks -- 10/31/2017, 8:56 am
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/27/2017, 2:36 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Paul Harker -- 10/27/2017, 4:26 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/27/2017, 4:51 pm
Ripping Helpers
Jay Babina -- 10/28/2017, 11:48 am
Re: Ripping Helpers
JohnAbercrombie -- 10/28/2017, 12:53 pm
Re: feed stands
Nick Schade - Guillemot Kayaks -- 10/28/2017, 9:32 pm
Re: feed stands
Bill Hamm -- 10/29/2017, 1:09 am
Re: feed stands
JohnAbercrombie -- 10/29/2017, 1:42 am
Re: feed stands
Jay Babina -- 10/29/2017, 7:42 am
Re: Making wood slide
Nick Schade - Guillemot Kayaks -- 10/29/2017, 9:56 am
Re: Making wood slide
Bill Hamm -- 10/30/2017, 2:01 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Bill Hamm -- 10/28/2017, 12:05 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Olli -- 10/28/2017, 7:57 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Paul Harker -- 10/28/2017, 10:07 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Bill Hamm -- 10/29/2017, 1:13 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Paul Harker -- 10/30/2017, 6:18 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 10/31/2017, 9:11 am
Re: Material: 5/4 Rough Western Red Cedar -- best
Bill Hamm -- 11/2/2017, 9:24 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
JohnAbercrombie -- 11/2/2017, 11:57 pm
Re: Material: 5/4 Rough Western Red Cedar -- best
Bill Hamm -- 11/7/2017, 12:37 am