Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Launching: Carbon Kevlar Mariner Max
By:John Urschel
Date: 12/4/2017, 9:14 pm
In Response To: Re: Launching: Carbon Kevlar Mariner Max (JohnAbercrombie)

They are caps for 3/4" Schedule 40 PVC pipe, so about 1 1/16" across the recess.
I had to look around a bit to find caps that were rounded on the end - easier to wrap the epoxy and glass around than the square-ended ones.
The cross bar is 3/16 SS rod which protrudes about 1/4" out each side of the cap, under deck.

John

Thank you for those details.

John U

Messages In This Thread

Launching: Carbon Kevlar Mariner Max *PIC*
JohnAbercrombie -- 12/4/2017, 4:27 pm
Re: Launching: Carbon Kevlar Mariner Max
John Urschel -- 12/4/2017, 6:20 pm
Re: Launching: Carbon Kevlar Mariner Max
JohnAbercrombie -- 12/4/2017, 7:46 pm
Re: Launching: Carbon Kevlar Mariner Max
John Urschel -- 12/4/2017, 9:14 pm