Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Milky finish
By:Rob Macks/Laughing Loon CC&K
Date: 2/24/2018, 8:02 pm
In Response To: Re: Strip: Milky finish *PIC* (JohnAbercrombie)

In the upper right of the photo I see a fiberglass cloth pattern in several places which tells me the resin didn't wet-out the fiberglass cloth properly. Resin was not thin enough for long enough.

The general cloud area does look like instances of uncured epoxy reaction to moisture that I've seen before.

BTW the simple cure for foam by roller is to pour resin OVER the roller cover so it has a minute to absorb resin and displace all the air in the roller cover foam, instead of pushing a dry roller cover full of air into resin.

Low Viscosity MAS is their standard laminating resin, not one of the special ultra thin resins like System Three Clear Coat.

Another recently revealed variable by Randy is the glass wet-out was three years old. Was that surface scrubbed for amine and sanded before adding fill coats?

Messages In This Thread

Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 11:19 am
Re: Strip: Milky finish
Olli -- 2/23/2018, 11:39 am
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 2:23 pm
Re: Strip: Milky finish
JohnAbercrombie -- 2/23/2018, 3:41 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 11:03 pm
Re: Strip: Milky finish *PIC*
JohnAbercrombie -- 2/24/2018, 6:31 pm
Re: Strip: Milky finish
Rob Macks/Laughing Loon CC&K -- 2/24/2018, 8:02 pm
Re: Strip: Milky finish
Rob Macks/Laughing Loon CC&K -- 2/23/2018, 12:58 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 2:30 pm
Re: Strip: Milky finish
JohnAbercrombie -- 2/23/2018, 3:44 pm
Re: Strip: Milky finish
JohnAbercrombie -- 2/24/2018, 9:25 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/24/2018, 9:37 pm
Re: Strip: Milky finish
Qaannat -- 2/27/2018, 8:11 am
Re: Strip: Milky finish
Randy Echtinaw -- 2/27/2018, 9:49 am
Re: Strip: Milky finish
Bill Hamm -- 2/28/2018, 12:30 am
Re: Strip: Milky finish
Randy Echtinaw -- 3/1/2018, 7:11 pm
Re: Strip: Milky finish
Bill Hamm -- 3/2/2018, 12:19 am
Re: Strip: Milky finish
M A Bielski -- 2/23/2018, 2:03 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 2:56 pm
Re: Strip: Milky finish
Rob Macks/Laughing Loon CC&K -- 2/23/2018, 4:32 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 11:16 pm
Re: Strip: Milky finish
Rob Macks/Laughing Loon CC&K -- 2/24/2018, 9:23 am
Re: Strip: Milky finish
JohnAbercrombie -- 2/24/2018, 6:45 pm
Re: Strip: Milky finish
Bill Hamm -- 2/27/2018, 12:18 am
Re: Strip: Milky finish
Randy Echtinaw -- 2/27/2018, 8:00 am
Re: Strip: Milky finish
M A Bielski -- 2/24/2018, 11:05 pm
Re: Strip: Milky finish
JohnAbercrombie -- 2/25/2018, 11:14 am
Re: Strip: Milky finish
Glen Albert -- 2/26/2018, 8:08 am
Re: Strip: Milky finish
Olli -- 2/26/2018, 8:53 am
Re: Strip: Milky finish
Glen Albert -- 2/26/2018, 10:58 am
Re: Strip: Milky finish
JohnAbercrombie -- 2/26/2018, 11:26 am
Re: Strip: Milky finish
M A Bielski -- 2/26/2018, 4:59 pm
Re: Strip: Milky finish
M A Bielski -- 2/26/2018, 5:01 pm
Re: Strip: Milky finish
scottbaxter -- 2/23/2018, 4:28 pm
Re: Strip: Milky finish
JayBabina -- 2/23/2018, 5:52 pm
Re: Strip: Milky finish
Randy Echtinaw -- 2/23/2018, 10:00 pm
Re: Strip: Milky finish
Etienne Muller -- 2/24/2018, 4:10 am
Re: Strip: Milky finish
JayBabina -- 2/24/2018, 7:18 am
Re: Strip: Milky finish
Randy Echtinaw -- 2/24/2018, 8:06 am