Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: deck fitting
By:JohnAbercrombie
Date: 3/1/2018, 11:48 pm
In Response To: Re: Strip: deck fitting (Randy Echtinaw)

Olli, good advice except for the fact there will be at least 3 fittings in each end that are no longer accessible from the backside.

Randy-
You might be surprised how far you can reach, especially with a helper to turn the above-deck screwdriver. Beyond that, the socket wrench on a stick (pipe) does wonders.

For a low profile alternative, the webbing loops through slots work pretty well and you can pull them right to the end of the boat if necessary (pull wire inserted down into the deck).

Don't even think about deck fittings secured with screws unless you have hefty sheer clamps or end blocks to screw into. I think folks refer to machine screws (aka bolts) as screws sometimes.

Messages In This Thread

Strip: deck fitting
Randy Echtinaw -- 3/1/2018, 12:32 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/1/2018, 12:54 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/1/2018, 7:08 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/1/2018, 11:48 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/1/2018, 11:57 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 8:03 am
Re: Strip: deck fitting
Olli -- 3/2/2018, 8:19 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:25 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 11:58 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:09 pm
Re: Strip: deck fitting
Olli -- 3/1/2018, 1:11 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/1/2018, 2:44 pm
Re: Strip: deck fitting
J Van Buren -- 3/2/2018, 8:34 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:02 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:19 pm
Re: Strip: deck fitting
Etienne Muller -- 3/2/2018, 1:03 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 1:17 pm
Re: Strip: deck fitting
Bill Hamm -- 3/3/2018, 12:04 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/3/2018, 2:52 am
Re: Strip: deck fitting
Bill Hamm -- 3/4/2018, 12:03 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/4/2018, 2:17 am
Re: Strip: deck fitting
Randy Echtinaw -- 3/4/2018, 9:15 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 2:45 pm
Re: Strip: deck fitting
Etienne Muller -- 3/2/2018, 3:59 pm
Re: Strip: deck fitting *PIC*
rbodelon -- 3/2/2018, 4:13 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 8:38 pm
Re: Strip: deck fitting *PIC*
rbodelon -- 3/3/2018, 3:05 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/3/2018, 12:10 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/3/2018, 8:40 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/3/2018, 11:16 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/4/2018, 9:25 am
YES Those are like the ones I purchased
J Van Buren -- 3/3/2018, 7:57 am