Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Wood/grain quality for strips
By:Randy Echtinaw
Date: 1/8/2011, 7:52 am
In Response To: Re: Strip: Wood/grain quality for strips *PIC* (Tim Sheehan)

: I'm a firm believer in searching through the piles of lower quality
: wood.

: I was able to get a $22.00 mostly clear, western red cedar 18 foot
: 2 x 12 from a local home improvement center. It was sold as
: landscape quality. With the help of a neighbor who is a
: professional woodwooker, I was able to rip it into full length
: strips. I cut these in half lengthwise. The hull, shown wetted
: out for final sanding, is full length strips from the shear line
: to the lighter strips near the center. From there to the final
: strips of the keel, I used strips from another "landscape
: quality" board, and had to cut out a couple of knots. I
: have saved the nicer part of the board for the deck.

: Of course, part of my luck with getting good wood comes from living
: in the Pacific Northwest.

I guess I have a different attitude than most of you guys. I enjoy building boats not driving and sorting through lumber piles. I order 1"10"x10' clear cedar from the local lumberyard. It arrives the next week - perfect boards, $40 each:)

Messages In This Thread

Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 5:16 pm
Re: Strip: Wood/grain quality for strips *PIC*
Kurt Maurer -- 1/7/2011, 6:53 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 7:16 pm
Re: Strip: Wood/grain quality for strips
Kurt Maurer -- 1/7/2011, 8:37 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/8/2011, 12:38 pm
Re: Strip: Wood/grain quality for strips *PIC*
Tony Olsen -- 1/7/2011, 10:20 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 7:12 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/7/2011, 7:00 pm
Re: Strip: Wood/grain quality for strips
george jung -- 1/7/2011, 7:30 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/7/2011, 10:23 pm
Re: Strip: Wood/grain quality for strips
Don T -- 1/7/2011, 10:47 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:23 pm
Re: Strip: Wood/grain quality for strips
dave g -- 1/8/2011, 12:26 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:03 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:13 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:25 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:41 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 6:08 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:41 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:43 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 11:21 am
Re: Strip: Wood/grain quality for strips
dave g -- 1/9/2011, 12:51 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 10:58 am
Re: Strip: Wood/grain quality for strips *PIC*
Tim Sheehan -- 1/8/2011, 12:59 am
Re: Strip: Wood/grain quality for strips
Randy Echtinaw -- 1/8/2011, 7:52 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 8:40 am
Thanks!
Stephen Troy -- 1/8/2011, 8:09 pm
Re: Thanks!
Don T -- 1/8/2011, 9:08 pm
Re: Thanks!
ancient kayaker -- 1/14/2011, 6:03 pm