: Hi John,
: This might help.Along with the hatches there is a glove box.
: http://www.redfishkayak.com/livingston.htm

They say the only stupid question is the unasked one so . . . I have looked at the Redfishkayak site photos above and would like to try installing bulkheads in separate halves as shown. Looks much easier than trying to glass around the edges after the deck/hull have been assembled. I would like to know just what is used for a measuring/reference point to get both halves of all the bulkheads to align for glassing after deck/hull assembly. I am assuming alignment strips are glued to the hull from the bow and stern back to the first bulkhead as this area would be inaccessible for taping after assembly.
Thank you very much,
Randy