Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Finally building *PIC*
By:Sean Dawe
Date: 3/18/2014, 12:32 pm
In Response To: Re: Strip: Finally building (Dan)

I used 3/4" WRC cedar for the internal stem and stern on my Black Pearl Once I had the hull stripping done, I simply chiseled out the excess wood as it is not really needed for strength. It basically creates a wood fillet which is, most likely, lighter than an epoxy one of the same size!!. A quick sanding and it was ready to be glassed over with the rest of the inside of the hull.

Sean

Messages In This Thread

Strip: Finally building *PIC*
Dan -- 3/17/2014, 11:53 am
Re: Strip: Finally building
A. Edie -- 3/17/2014, 12:19 pm
Re: Strip: Finally building
Kevin Greer -- 3/17/2014, 1:37 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 4:14 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 3:04 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 5:44 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 10:15 pm
Re: Strip: Finally building
John van burden -- 3/17/2014, 9:36 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 10:49 pm
Re: Strip: Finally building
scottbaxter -- 3/17/2014, 10:46 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 10:59 pm
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 12:48 am
Re: Strip: Finally building
Bill Hamm -- 3/18/2014, 12:56 am
Re: Strip: Finally building
Bob Ten Eyck -- 3/18/2014, 11:16 am
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 11:17 pm
Re: Strip: Finally building
Marc Upchurch -- 3/18/2014, 11:55 am
Re: Strip: Finally building *PIC*
Sean Dawe -- 3/18/2014, 12:32 pm
Re: Strip: Finally building
A. Edie -- 3/18/2014, 12:46 pm
Re: Strip: Finally building
Allan -- 3/18/2014, 4:56 pm
Re: Strip: Finally building
A. Edie -- 3/18/2014, 7:29 pm
Re: Strip: Finally building
Dan -- 3/18/2014, 11:09 pm
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 11:21 pm
Re: Strip: Finally building
Dan -- 3/18/2014, 11:33 pm
Re: Strip: Finally building
Bill Hamm -- 3/19/2014, 12:44 am
Re: Strip: Finally building
ddaniels -- 3/19/2014, 6:04 am