Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: deck fitting
By:Randy Echtinaw
Date: 3/3/2018, 8:40 pm
In Response To: Re: Strip: deck fitting *PIC* (rbodelon)

Rbodelon, thank you for the description and photo's. Looks like a doable project for me except I am not seeing how they will work in the bow/stern areas where I no longer have interior access. I may make your recessed design for everywhere except those areas and try to make the same design with reversed lips so they insert from the outside. This would leave them protruding but at least they would be at the ends of the boat. Minimum I would have is one at each end, most would be three at each end. Depends on how far apart I can get them so I could reach an accessible area.
Thank you again for the posting :)

Messages In This Thread

Strip: deck fitting
Randy Echtinaw -- 3/1/2018, 12:32 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/1/2018, 12:54 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/1/2018, 7:08 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/1/2018, 11:48 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/1/2018, 11:57 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 8:03 am
Re: Strip: deck fitting
Olli -- 3/2/2018, 8:19 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:25 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 11:58 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:09 pm
Re: Strip: deck fitting
Olli -- 3/1/2018, 1:11 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/1/2018, 2:44 pm
Re: Strip: deck fitting
J Van Buren -- 3/2/2018, 8:34 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:02 pm
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 12:19 pm
Re: Strip: deck fitting
Etienne Muller -- 3/2/2018, 1:03 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 1:17 pm
Re: Strip: deck fitting
Bill Hamm -- 3/3/2018, 12:04 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/3/2018, 2:52 am
Re: Strip: deck fitting
Bill Hamm -- 3/4/2018, 12:03 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/4/2018, 2:17 am
Re: Strip: deck fitting
Randy Echtinaw -- 3/4/2018, 9:15 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/2/2018, 2:45 pm
Re: Strip: deck fitting
Etienne Muller -- 3/2/2018, 3:59 pm
Re: Strip: deck fitting *PIC*
rbodelon -- 3/2/2018, 4:13 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/2/2018, 8:38 pm
Re: Strip: deck fitting *PIC*
rbodelon -- 3/3/2018, 3:05 am
Re: Strip: deck fitting
JohnAbercrombie -- 3/3/2018, 12:10 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/3/2018, 8:40 pm
Re: Strip: deck fitting *PIC*
JohnAbercrombie -- 3/3/2018, 11:16 pm
Re: Strip: deck fitting
Randy Echtinaw -- 3/4/2018, 9:25 am
YES Those are like the ones I purchased
J Van Buren -- 3/3/2018, 7:57 am