Before I say anything else: Amazing job, Kent!

I have a velcro'ed-in seat in my Chesapeake. The velcro contact-cemented to the foam holds pretty well, but the velcro cc'ed to the hull wants to peel up in that wet environment. I finally glued it in with epoxy, and it's not going anywhere!

Shawn

: I tried the velcro route and ended up gluing my seats in. A couple of times
: getting wet and the velcro let go. It wasn't the glue to the seat or the
: boat but the glue backing to the velcro cloth that let go. I tried contact
: cement on the velcro but it eventually let go as well. All I can think of
: is to glue the seat to something thats held in mechanically or epoxied in.
: But then that will bring the center of gravity up. I guess I'll just leave
: well enough alone for now.