Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Why stop there?
By:Shawn B
Date: 8/1/2000, 1:36 pm
In Response To: Re: Why stop there? *Pic* (Bill Boyd)

Excellent, Bill!

I'm glad I posted my experience with the bird's mouth on the bbs, so you could take it to the next level!

Shawn

: Gee Mick

: I was thinking about you when I was looking for something smaller to use as a
: support for the innertube... vinyl coated clothsline tied to the rear
: bumper of my rambler or something. Anyway I made a small sample of some
: 1/8" thick cedar and found it didn't work so well eight sided ..but
: ten sided and a 54 degree cut I got something I will have to try . Maybe I
: could put Nicads in each end with mercury switchs and bright L.E.D 's so
: the blade that was in the air would be lit and a small solar cell on each
: blade for recharging in the daytime when the paddle was stored
: horizontal,it would kinda be like those running shoes. Or make provisions
: for those pulleys they use on compound bows and string it with Dacron for
: launching small harpoons at those orcas that mistake you for a large
: surface plug...WWWWHOOOA ... that cedar really is toxic!!

: Later

: Bill

Messages In This Thread

WoodenBoat Bird's Mouth Paddle Shaft *Pic*
Shawn B -- 7/27/2000, 10:32 am
Re: Good Going Shawn!! *Pic*
Bill Boyd -- 7/30/2000, 9:04 pm
Blade Idea
mike allen ---> -- 7/31/2000, 5:52 pm
Re: Why stop there? *Pic*
Bill Boyd -- 8/1/2000, 11:22 am
Re: Why stop there?
Shawn B -- 8/1/2000, 1:36 pm
Re: Thank you Shawn!
Bill Boyd -- 8/1/2000, 8:26 pm
Don't you know where to stop?????
mike allen ---> -- 8/1/2000, 12:36 pm
Re: Blade Idea - Like for Kent Boutillier
mike allen ---> -- 7/31/2000, 7:28 pm
Lamenting le LE lost, lonely & leftout - (nt)
mike allen ---> -- 7/31/2000, 7:42 pm
Re: Good Going Shawn!!
Ross Leidy -- 7/31/2000, 10:14 am
Re: Good Going Shawn!!
Bill Boyd -- 7/31/2000, 11:49 am
Seal the inside with epoxy
Dale Frolander -- 7/28/2000, 2:39 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Spidey -- 7/27/2000, 5:08 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Nicholson -- 7/27/2000, 5:35 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 6:49 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
TomRobb -- 7/28/2000, 10:27 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 5:26 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Spidey -- 7/27/2000, 6:21 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Ron Eike -- 7/28/2000, 7:37 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Rehd -- 7/27/2000, 1:20 pm
Re: Possible failure?
Shawn B -- 7/27/2000, 2:50 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Rob Forsell -- 7/27/2000, 12:57 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Don Beale -- 7/27/2000, 12:28 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 12:58 pm
Re:I have to disagree with the crowd
Don Beale -- 7/28/2000, 12:05 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Hanks -- 7/27/2000, 1:32 pm
Re: Got weep holes?
Shawn B -- 7/27/2000, 1:52 pm
eliminate the need for weepholes
Paul G. Jacobson -- 7/28/2000, 1:08 am
Re: Got weep holes?
Craig Doyle -- 7/27/2000, 2:59 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
peter czerpak -- 7/27/2000, 12:13 pm
Re: Composite cored Bird's Mouth
Shawn B -- 7/27/2000, 12:56 pm
Re: Composite cored Bird's Mouth
Nick Schade - Guillemot Kayaks -- 7/28/2000, 10:12 am
Possible composite core technique
Paul G. Jacobson -- 7/28/2000, 12:56 am
Re: Composite cored Bird's Mouth
Bill Boyd -- 7/27/2000, 9:36 pm
Re: Hollow core=Brilliant!
Shawn Baker -- 7/28/2000, 12:29 am
Re: yup *Pic*
Bill Boyd -- 7/29/2000, 4:00 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Hanks -- 7/27/2000, 11:05 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 1:01 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
j -- 7/28/2000, 3:51 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Jason -- 7/28/2000, 4:26 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
jtmc -- 7/28/2000, 11:38 pm
Re: Twist in Bird's Mouth
Shawn B -- 7/28/2000, 4:22 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Ross Leidy -- 7/27/2000, 10:44 am