Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Good Going Shawn!!
By:Ross Leidy
Date: 7/31/2000, 10:14 am
In Response To: Re: Good Going Shawn!! *Pic* (Bill Boyd)

Thanks for the photo, Bill. I can't wait to try it. Guess I'll have to find an innertube store.

Will you need to glass the exterior of the shaft, or does the interior glass oval strong enough?

Ross

: Shawn you really have a winner here I laid one up this afternoon from some
: red and white cedar strips with 6 oz cloth on the inside and gave it a 70
: degree twist. I had to stretch the innertube onto some 3/8" copper
: tube for the 1/2" inside width . surgical latex tubing would probably
: work,or better still the silicone tubing wouldn't stick to the epoxy at
: all and leave the inside absolutely smooth. but anyway I must put hose
: clamps on my shopping list , they would have made it easier , but it went
: pretty smoothly, with no bulging like that sample I made yesterday. also I
: rounded the rest of that 2 ft sample to what I thought was fairly even and
: then cut it into four inch lengths and the thickness variation was
: unacceptable . the mahogany shaft I laid up the day before did poorly in
: the destructive testing, delaminating from the glass core easily .. open
: grain and loose fiber. the pine sample shaft stayed together very well.
: Rounding the birdsmouth shaft should be a snap with little chance of
: getting too thin . now I have to make some blades worthy of this stick.
: Thankyou muchly Later Bill

Messages In This Thread

WoodenBoat Bird's Mouth Paddle Shaft *Pic*
Shawn B -- 7/27/2000, 10:32 am
Re: Good Going Shawn!! *Pic*
Bill Boyd -- 7/30/2000, 9:04 pm
Blade Idea
mike allen ---> -- 7/31/2000, 5:52 pm
Re: Why stop there? *Pic*
Bill Boyd -- 8/1/2000, 11:22 am
Re: Why stop there?
Shawn B -- 8/1/2000, 1:36 pm
Re: Thank you Shawn!
Bill Boyd -- 8/1/2000, 8:26 pm
Don't you know where to stop?????
mike allen ---> -- 8/1/2000, 12:36 pm
Re: Blade Idea - Like for Kent Boutillier
mike allen ---> -- 7/31/2000, 7:28 pm
Lamenting le LE lost, lonely & leftout - (nt)
mike allen ---> -- 7/31/2000, 7:42 pm
Re: Good Going Shawn!!
Ross Leidy -- 7/31/2000, 10:14 am
Re: Good Going Shawn!!
Bill Boyd -- 7/31/2000, 11:49 am
Seal the inside with epoxy
Dale Frolander -- 7/28/2000, 2:39 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Spidey -- 7/27/2000, 5:08 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Nicholson -- 7/27/2000, 5:35 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 6:49 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
TomRobb -- 7/28/2000, 10:27 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 5:26 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Spidey -- 7/27/2000, 6:21 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Ron Eike -- 7/28/2000, 7:37 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Rehd -- 7/27/2000, 1:20 pm
Re: Possible failure?
Shawn B -- 7/27/2000, 2:50 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Rob Forsell -- 7/27/2000, 12:57 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Don Beale -- 7/27/2000, 12:28 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 12:58 pm
Re:I have to disagree with the crowd
Don Beale -- 7/28/2000, 12:05 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Hanks -- 7/27/2000, 1:32 pm
Re: Got weep holes?
Shawn B -- 7/27/2000, 1:52 pm
eliminate the need for weepholes
Paul G. Jacobson -- 7/28/2000, 1:08 am
Re: Got weep holes?
Craig Doyle -- 7/27/2000, 2:59 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
peter czerpak -- 7/27/2000, 12:13 pm
Re: Composite cored Bird's Mouth
Shawn B -- 7/27/2000, 12:56 pm
Re: Composite cored Bird's Mouth
Nick Schade - Guillemot Kayaks -- 7/28/2000, 10:12 am
Possible composite core technique
Paul G. Jacobson -- 7/28/2000, 12:56 am
Re: Composite cored Bird's Mouth
Bill Boyd -- 7/27/2000, 9:36 pm
Re: Hollow core=Brilliant!
Shawn Baker -- 7/28/2000, 12:29 am
Re: yup *Pic*
Bill Boyd -- 7/29/2000, 4:00 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Mike Hanks -- 7/27/2000, 11:05 am
Re: WoodenBoat Bird's Mouth Paddle Shaft
Shawn B -- 7/27/2000, 1:01 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
j -- 7/28/2000, 3:51 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Jason -- 7/28/2000, 4:26 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
jtmc -- 7/28/2000, 11:38 pm
Re: Twist in Bird's Mouth
Shawn B -- 7/28/2000, 4:22 pm
Re: WoodenBoat Bird's Mouth Paddle Shaft
Ross Leidy -- 7/27/2000, 10:44 am